1.5. Safety rules, tools & devices After several years of analyzing accidents and conducting accident reconstruction research, specialists in the field of occupational accident prevention have established that accidents occur for certain causes. They discovered that workplace safety is linked to worker behavior and human variables. They devised ten safety rules, which, while many of you may have heard before, are worth repeating. STAY ALERT – and you’ll survive. The more alert a worker is, the less likely he or she is to be injured. If you’re not sure how to operate equipment or complete a task, ask your supervisor. Do not guess and stumble through. Make sure you know exactly how to do it correctly and safely ahead of time. WEAR THE RIGHT CLOTHES: Work clothes should fit appropriately. Anything that can get stuck in machinery or trip you up is dangerous. Wear protective gear and equipment as needed. USE THE RIGHT TOOLS: If you need a hammer, obtain one. Using pliers, a wrench, or a screw driver may be more convenient, but it increases your chances of being harmed. LEARN TO LIFT – Lifting requires more than just strength; it’s an art. Do not strive to show off your strength; you may wind up in the hospital. Seek assistance to manage anything that is excessively big or unwieldy for you. DON’T BE A PRANKSTER: Practical jokes and horseplay can be deadly, especially around heavy machinery. If you feel the want to play, wait till after work. BE TIDY – Good housekeeping decreases dangers in the job and at home. When not in use, always store tools away. Keep the flooring clean by picking up scraps and wiping up spills. Slips and trips can be lethal. REPORTING IS IMPORTANT – Always report accidents, malfunctioning equipment, and/or harmful conditions. GET FIRST AID IMMEDIATELY IF YOU ARE HURT, even if it appears trivial. Neglecting an injury can lead to a serious infection, weeks of wasted time, and possibly permanent consequences. BACK YOUR SAFETY PROGRAM – If you have a suggestion that you believe will help prevent accidents, share it with your supervisor. Set an example by following safety standards. Cooperate with your safety committee. NEVER TAKE A CHANCE – Short cuts are perhaps the most lethal killers, second only to negligence. To save a minute or two, you may end up losing your life. Whatever you do, if you don’t do it safely, you’re not doing it correctly! Important Link https://docs.google.com/document/d/1uhFWnzvLamLXps7P1O4jwS8UgX2xEqNE/edit?usp=sharing&ouid=113886012610005015741&rtpof=true&sd=true